Laptop Not Turning On: How Do I Fix a Laptop That Won’t Turn On?

How Do I Fix a Laptop That Won’t Turn On?

We use technical devices for our convenience. In the absence of such devices, of course, life will become very difficult. Assuming, you are sitting with your laptop to do some important task, therefore, you press the power button and you get to see no response or nothing happens. You get a rude shock, as you didn't anticipate such a thing.

Read Also: Uses of Computers in Business- their Advantages and Disadvantages

Folks, nothing to panic as such. You don't have to presume your laptop has met with an untimely death. There may be other reasons for the same, not known to you. The idea behind publishing this article is to familiarize you with certain reasons why at times your laptop may not start and we will also suggest ways to fix it. Read this article to gain more information about such a situation and how to deal with it.

The 6 Ways to Fix The Issue When Your Laptop Won't Turn On 

Read Also: Introduction to the Computer - Fundamentals of Computers- A Definition

If your laptop won't power up then it could be due to a malfunctioning screen, faulty power supply or it could be a case of failed hardware. In some cases, you can fix the problem yourself. You may be required to adjust the laptop's configuration or by replacing a specific part, you can get rid of the problem. So don't press the panic button in haste. Sometimes the problem may not be as big as it seems. Yes, if the laptop is old enough then it is better to go for a new one instead of getting it repaired. 

1. Check The Power Supply and Battery

If your HP laptop is not getting turned on when you plug it in then first up, you have to check the power supply, as it can create quite a few issues so be mindful of this fact while identifying the problems.

Sometimes a minor problem makes it look severe. If you have used the wrong charging chord or in case the power supply has failed, then these types of problems can also be held responsible for the trouble.  What needs to be done then. Follow the steps, stated below for identifying and fixing such problems.

1. Remove your laptop to find out whether the power supply is the main cause of such a problem.

2. Next up, plug your laptop into a functioning outlet.

3. You never know even the outlet may not be working properly so you check it by plugging it into some other device. If it works then rest assured outlet is not the issue.

4. If you can power on your laptop without the battery then the battery is likely to be the issue rather than the power supply.

5. Then simply go for a new one however, till the time you buy another one you have to use AC power only while using your existing laptop.

6. You can use your laptop without the battery installed however, you will be required to always plug it into an outlet.

Read Also: The Main Differences Between Desktop Computers and Laptops

CMOS Battery

You can also replace the CMOS battery which stores the BIOS settings in the motherboard, this is another way of testing it. Another point worth looking into is to check whether all the cables are properly connected. If the power cables are loose then it's obvious your machine is deprived of the juice it needs to run.

2. Diagnose Screen Issues

Now since you have checked the power supply and you have reached the conclusion that the power supply is not the reason then what next? You have to troubleshoot further, but how? Let's check out the same below.

1. At the outset, you have to disconnect external displays including monitors and projectors. This is important to make sure that they are not interfering with the start-up process of your laptop.

2. It can very well happen in some cases that after the power button is lit you are hearing fans or noises, but you are not getting to see any image. In such a situation turn out the lights to check out, if there is an image being displayed faintly.

3. In case, you have seen a very faint image once the lights have been turned off in that event in all probability the screen's inverter has become dysfunctional or is not working. Therefore, go for replacement.

4. Alternatively, your brightness button may be broken.

Read Also: Most Popular Image formats Like JPEG-JPG-GIF-PNG and Significance

There could be another reason, if you don't get to see any image on starting up your laptop then it could be due to the fact, that the LCD panel has broken. You can always fix it however, if your laptop is of an older model then it will be wise on your part to replace your entire laptop.

3 . Remove All Devices From Your Laptop

Another cause that must be given priority is to check out whether you have left a memory card, DVD, or USB drive in your notebook, as this can also create problems because the laptop doesn't power on. Usually, in such cases, it has been observed, that it might be getting stuck, as the BIOS may be trying to boot from a removable storage device. Therefore, you have to remove all USB drives and try to boot up your computer. This could be another way of addressing such a problem.

Read Also: There is a need to Update Technology and Adopt Superior Technology  

4. Use a Rescue Disc

You can fall back on a rescue disc since it lets you boot your computer and fix issues with the Windows operating system. If the root cause of the problem is a virus then the rescue disc will identify it by scanning tools therefore, you can get rid of it.

Read Also: What is Open-Source Software? Advantages and Disadvantages   

5. Boot in Safe Mode

In case, your HP laptop is not getting turned on even then you can use it in safe mode. What safe mode does is that it enables you to uninstall new programs or drivers that could be affecting your laptop? In fact, if your original account has been corrupted then also it helps you to create a new user account.

Read Also: Merits and Demerits of GPS and Applications of GPS Technology  

6. Check Hardware

After checking all, if the problem has not yet been detected then the last step would be to check the hardware. Assuming, you have installed hardware of late like a new RAM Kit, then it could be very well the cause of your boot issues. You got to remove it then reinstall it and try to boot it again. If your hardware like a hard disc in your laptop has failed then it is pretty difficult to fix it. If you get to hear a clicking noise or drive spinning but then powering down, it is a strong indication that your hard drive is not working. Then the choice is obvious, you will be required to replace your hard drive. If you get subjected to this kind of situation, it will be a good move on your part then to use an external hard drive so that you can back up all those files that you find important.

Conclusion

It is obvious we rely on our laptops for most of the official or personal work and if it does not work then it disrupts our life. It leads to a mess and disarray. The key is to diagnose, repair, or replace the laptop. We have mentioned the various reasons owing to which your laptop may give you a tough time while starting. We have also suggested the remedial measures you can take. We are hopeful this article will help our readers, as now day's majority of the people use laptops. If you want such articles then kindly let us know by stating the same in the comment section.

Read Also:

• Introduction to the LINUX Operating System and Advantages of LINUX Base OS  
• Free Upgrade Windows OS: How to Upgrade from Windows 10 to Windows 11 
• Advantages of Inkjet Printers and Tonner Printers?Toner vs. Ink Printer  
• Semiconductor: The Emergence of Semiconductor Business in India 
• Folder or Directory? Here’s Why Folders are Called Directories in Linux 
• Who is the World's Largest Manufacturer of Motherboards in 2023? 
• How to Reset a Computer System and Permanently Wipe All Data 
• Windows 11 Users No Longer Need Third-Party Tools Like WinRAR